Home :: Motorcycle & Scooter Parts :: Electrics :: Battery Motorcycle Ytx9-Fp JMT Lithium Ion Battery For Adly/Herchee 707.00.37

Battery Motorcycle Ytx9-Fp JMT Lithium Ion Battery For Adly/Herchee 707.00.37

Battery Motorcycle Ytx9-Fp JMT Lithium Ion Battery  For Adly/Herchee 707.00.37
 
(0 reviews)  

SKU
(LARS)707.00.37/Adly
Weight
10.00 lbs
Our price:
£78.24
Click here to be notified of price drops of this item
 
Qty
Click here to be notified when this item is nearly out of stock

Battery Motorcycle Ytx9-Fp JMT Lithium Ion Battery For Adly/Herchee 707.00.37

Lithium-ion batteries by JMT, High-technology for your motorcycle.
The latest generation of batteries are identified by the red cover.
Spacer (S)
Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box.
Indicator (I)
All batteries are equipped with a battery .
Simply press the test button. When all three blue LEDs light up the battery is fully charged(ful). If it lights only 2 LEDs, it is only half charged (med). When only one LED is lit (low), the battery must be charged immediately.
Replacing a standard lead-acid battery by a JMT lithium-ion batter can save you up to up to 5 kg in weight with minimum effort.
JMT lithium-ion batteries have the following benefits:
- About 1/3 of the weight of comparable lead acid battery
- Unbeatable ratio of cost/weight savings
- Can be mounted in any position - no acid spillage
- Does not contain heavy metals
- Balanced discharge/charge of all cells by the integral balancer
- Fast charging with high ampage systems (up to 90% fully charged in only 6 minutes)
- Very low self-discharge - long shelf life (up to 5% per month)
- Excellent performance at high temperatures (even up to
60° C)
- Safe technology and high durability
Lead-acid batteries only use 30% of their capacity
whilst nearly 100% of the capacity of lithium-ion batteries is used. For this reason, lithium versions of JMT batteries need only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.
A uniform charging of all the cells is ensured by a built-in processor (the "balancer").
The dimensions of the lithium-ion batteries (using adapters where necessary)correspond to the dimensions of the original lead-acid batteries and the connections are identical, thus the battery can be replaced easily in a few minutes.
*** IMPORTANT ***
Please note that only suitable battery chargers are used, such as the JMP 800, JMP 4000 or the corresponding workshop equipment. Please ensure that a compatible charger is used as a wrong charger will invalidate the 2 year warranty.
For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below.
In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries (i.e showing 10 volts or less) These chargers use an output of more than 14.9 volts before they begin the actual charging cycle.
The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion.
Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius.
Technology - JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer.
The technology and the manufacturing process ensure the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery
- Energy 36 Wh
- Dimensions in mm 150x87x105
- Recommended charging current 1.5 A
- Maximum charging current for fast charging 15 A
- Weight 0.6 kg
- Starting current 180 A
Comparable in dimensions and connections with:
Yuasa Fact.-No. YTX9-BS

Model Codes :

Contents:1 Unit


Technical Data:
Voltage:   12v
Capacity:   3 Ah (10 Std)
Capacity:   36 Wh
Type:   Lithium
    Maintenance free
Manufacturer claimed CCA:   180 A
SAE as measured by JMP battery tester:   290 A
DIN as measured by JMP battery tester:   270 A
EN as measured by JMP battery tester:   160 A
Length:   150 mm
Width:   87 mm
Height:   105 mm
Weight (including acid):   0.8 kg
Acid Pack included:   No
Terminal connection:   Front
    from above
Positive terminal:   Front left
Negative terminal:   Front right
Breather hose:   Without
Manufacturer:   JMT

Motorcycle Fitment Data

Adly/Herchee ATV 150 S Sport 2004 - 2009
Adly/Herchee ATV 150 U Utility 2004 - 2007
Adly/Herchee ATV 300 S Sport 2004 - 2005
Adly/Herchee ATV 300 U Utility 2004 - 2005
Adly/Herchee Crossover 150 2005 - 2007
Adly/Herchee Crossover 150 Boost 2007 - 2009
Adly/Herchee Crossover 300 2005 - 2007
Adly/Herchee Crossover 300 Boost 2007 - 2009
Adly/Herchee Crossroad 150 2005 - 2009
Adly/Herchee Crossroad 300 2005 - 2008
Adly/Herchee Crossroad 300 Sentinel 2007 - 2010
Adly/Herchee Hurricane 300 XS 2007 - 2010
Adly/Herchee Sport 300 Interceptor 2007 - 2010

Customers also bought

FORK SEAL DRIVER SPLIT 36 MM Kayaba For Piaggio 722.10.08
£86.91
Cylinder Leak / Pressure Loss Tester Jmp For Aiyumo 722.47.36
£90.90
Goldfren AD018 VD329 FA101 FDB383 SBS575 SBS619 Gilera 330018
£11.93
Oil filter Oc236 For Piaggio 312.77.84
£11.40
Indicator Jmp For MZ/MUZ 706.13.36
£10.92
Seat Complete Black/Silver For Jmstar 711.00.34
£57.99
£13.75
£13.76
Brake Pads Sintered Srq TRW For Aprilia 787.09.83
£33.83

Reviews

There have been no reviews